MEGA Live and TargetLock Power Cable Installation

Connecting the three wires on the power cable of my MEGA Live Imaging or MEGA Live TargetLock.

You must connect the drain/shield wire and the ground wire on the power cable to a ground terminal/boat chassis ground point to ensure good performance.

The drain wire is the non-tinned wire. If this wire is not visible, it is necessary to strip the outer casing of power cable by two inches in order to expose the drain wire properly.

Accessory part number is PC 13

Installation Instructions

MEGA Live Imaging Installation Manual

MEGA Live Universal Installation Manual

MEGA Live TargetLock Installation Manual


Was this article helpful?
12 out of 21 found this helpful

Articles in this section

See more