Powering a MEGA 360

The MEGA 360 is powered by a separate power cable (details below) that connects to a 12 volt power source. This cable is included with a new purchase of a MEGA 360, and replacements are available to order if needed.

When connecting directly to a battery, an in-line 1 AMP slow blow fuse is required. We would also recommend a kill switch installed in order to manually power off the MEGA 360 when not in use.

Please refer to the installation guide below for any other questions.

Click Here

MEGA 360 Power Cable: MEGA 360 PC (item no. 720118-1)

Was this article helpful?
11 out of 39 found this helpful