MEGA 360 Compatibility and Mounting Options

Which Minn Kota and Humminbird products are compatible with the MEGA 360?

The MEGA 360 transducer is compatible with the following Humminbird models:

  • All XPLORE models
  • All APEX models
  • All SOLIX G2 and G3 models
  • HELIX 15 MEGA SI+ GPS G4N, HELIX 15 MEGA DI+ GPS G4N
  • HELIX 12 MEGA SI+ GPS G4N, HELIX 12 MEGA SI+ GPS G3N, HELIX 12 MEGA DI+ GPS G4N, HELIX 12 MEGA DI+ GPS G3N
  • HELIX 10 MEGA SI+ GPS G4N, HELIX 10 MEGA SI+ GPS G3N, HELIX 10 MEGA DI+ GPS G4N, HELIX 10 MEGA DI+ GPS G3N
  • HELIX 9 MEGA SI+ GPS G4N, HELIX 9 MEGA SI+ GPS G3N, HELIX 9 MEGA DI+ GPS G4N, HELIX 9 MEGA DI+ GPS G3N
  • HELIX 8 CHIRP MEGA SI+ GPS G4N, HELIX 8 MEGA SI+ GPS G3N

We strongly recommend you always keep your Humminbird unit up to date on its current software

Mounting Options

The MEGA 360 Imaging transducer is compatible with Minn Kota trolling motors featuring 45" and 52" shaft lengths, including:

  • Ultrex (including Ultrex QUEST*)
  • Fortrex
  • Maxxum
    ⚠️ Not compatible with 60" or longer shafts.
    The MEGA 360 shaft cannot be cut or modified for custom fitting. For installations on longer shafts, please refer to the MEGA 360 Universal model.

*To install an existing MEGA 360 on an Ultrex QUEST, use the updated MEGA 360 Mounting Plate or MEGA 360 Hardware Kit.

Note: When using the MKA-50 Bow-Mount Stabilizer, it must be mounted on the opposite side of the MEGA 360 transducer.

MEGA 360 Universal

To make MEGA 360 Imaging available to more anglers, Humminbird's exclusive technology is now available with a universal boat mount. Utilizing an adjustable, billet-aluminum bracket, this MEGA 360 Imaging product can be mounted to almost any boat, with or with a trolling motor, for picture-like detail in a 360-degree view under and around your boat.

Learn more about MEGA 360 Imaging - Universal

Was this article helpful?
237 out of 323 found this helpful

Articles in this section

See more