Backlight Adjustments and Night Mode

APEX, XPLORE and SOLIX G3 (Software Version 5.060 and Later)

• Power on the unit.
• Press the POWER key once to open the Power Xpress Menu.
• Adjust the backlight brightness at the bottom of the menu using the + or – controls.
• To enable Night Mode:
  • Tap the Gear icon to open Power Settings.
  • Select Auto or On.

SOLIX & APEX (Software Version 4.210 and Earlier)

• From the Home screen, select Settings.
• Select General.
• Under Backlight:
  • Adjust the brightness level from 1 to 10.
• To use Night Mode:
  • Set Night Mode to On to automatically adjust the backlight to level 1.
  • Set Night Mode to Off to automatically return the backlight to level 10.

HELIX

• Press the POWER key to open the X-Press™ Menu.
• Press the DOWN cursor once to highlight Light.
• Adjust brightness:
  • Press the LEFT cursor to decrease brightness.
  • Press the RIGHT cursor to increase brightness.
• To use Night Mode:
  • From the X-Press™ Menu, press the DOWN cursor twice to highlight Night Mode.
  • Press the RIGHT cursor to turn Night Mode On.
  • Press the LEFT cursor to turn Night Mode Off.
  • When On, the backlight automatically adjusts to level 6.
  • When Off, the backlight automatically returns to level 10.