Missing the Alarms Menu

"I can't find the alarms on my HELIX. What do I do?"

The Alarms tab or menu is only visible when the User Mode is set to: Custom (may be Advanced in some older models).

To check or change your User Mode setting, perform the following:

  1. Power the unit on in Normal Mode
  2. Press the MENU key twice to open the main menu.
  3. Use the LEFT or RIGHT arrow key to select Setup.
  4. Use the DOWN arrow key to select User Mode
  5. Press the RIGHT arrow key once to activate Custom User Mode.
  6. The Alarms tab will now be visible.
Was this article helpful?
1 out of 1 found this helpful

Articles in this section